Ready-to-use, high-performance motorized glider with a 2,206 mm wingspan in carbon-reinforced expanded polyolefin (EPO). Suitable for aerobatics, thermalling and slope flying, it is equipped with a KAVAN C3548-750 brushless motor, an 11 × 8" folding propeller, a KAVAN R-50SB Plus ESC and 6 installed micro servos. Full house control of ailerons, flaps, elevator, rudder and throttle. Operates with a 4S LiPo battery from 2,600 to 4,000 mAh (at least 30C).
The fully carbon-reinforced EPO foam fuselage is equipped with a KAVAN C3548-750 brushless motor, an 11 × 8-inch folding propeller and a KAVAN R-50SB Plus ESC with a powerful SBEC switchable stabilizer to power the 6 servos on board. The removable canopy is secured by a magnetic lock, and the cockpit compartment offers ample space for your receiver and flight pack. The elevator and rudder servos are installed in the aileron, guaranteeing improved responsiveness.
The two-piece EPO wing is reinforced by two carbon spars. The ends of the spars fit into aluminum joinery in the fuselage, and the wing halves are secured by a nylon bolt. Ailerons and flaps, both reinforced by carbon spars, are controlled by two pairs of wing-mounted servos, with short-wire pushrods for greater control precision.
The EPO horizontal stabilizer and elevator are also reinforced with carbon spars. It is detachable and attached to the aileron with two bolts, making it easy to transport and store.
The Pulse 2200 V2 is powered by a KAVAN C3548-750 brushless motor and a KAVAN R-50SB Plus 50A controller, with enhanced programming capabilities. To drive this model, you'll need a 14.8 V 2,600-4,000 mAh flight pack, with a discharge of at least 30°C (40°C preferred).
To sum up, the Pulse 2200 V2 is a high-performance, ready-to-use motorized glider, ideal for aerobatics, thermalling and hill flying. Its solid design and quality components make it an excellent choice for beginners and hobbyists alike.
