RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC
RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC
RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC
RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC
RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC
RC Motorgliders - Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ - FLASH RC

Swish Electro yellow approx.1.49m ARF TOPMODEL.CZ

Last items in stock
€149.17
Tax included

The Swish Electro from Topmodel CZ is an easy to use motorglider. Thanks to its small wingspan, you can take it everywhere with you! Experienced pilots will be surprised by its excellent flying and scraping qualities, even in small conditions.the fuselage with the nose cut at 30mm is molded in epoxy/fiberglass and painted yellow in this version. It is extended by a carbon beam.the wing is in 2 parts in the kit, the 2 half wings will be glued together. The wing is made of traditional balsa wood structure and covered with Oracover to show the structure by transparency.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

Technical characteristics

Topmodel CZ SwishTopmodel CZ Swish

  • Span : 1485mm
  • Length : 1100mm
  • Weight in flight : 450 to 600g
  • Wing area: 24dm².
  • Wing loading: 18.8 - 25g/dm²
  • Wing profile: MH30 mod.
  • RC functions: elevator, fin, ailerons

Required elements

  • 2x mini servos (rudder, elevator)
  • 2x micro servos (ailerons)
  • 1x brushless motor
  • 1x 30A controller
  • 1x Ø30mm cone for folding propeller
  • 1x pair of 12x6" blades
  • 1x LiPo 2S 1300mAh battery
  • 1x LiPo compatible charger
  • 1x radio control/receiver set 4 or more channels

Kit Contents

Swish Electro Topmodel CZ

  • Epoxy/fiberglass fuselage painted yellow
  • Carbon tail boom
  • Two-piece wing made of balsa wood with Oracover glue
  • Tail and elevator made of balsa wood with Oracover fabric
  • Quality accessories (rods, horns ...)
  • Decoration board
  • Illustrated instructions (download above)
Span in meters
1,49
Type of aircraft kit
Kit to equip
Material
Fiber / Composite
213-02055E-YELLOW
8800223331002
8800223331002
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

RC Motorgliders - E-Typhoon all fiber approx.2.00m yellow & black RCRCM - FLASH RC RC Motorgliders - E-Typhoon all fiber approx.2.00m yellow & black RCRCM - FLASH RC 2
Last items in stock
RC Motor Gliders: More Flight Time, Less Hassle

E-Typhoon all fiber approx.2.00m yellow & black RCRCM

RCRCM
164-E-TYPHOON-02
€440.83
The E-Typhon is a motorglider for experienced pilots, offering outstanding performance and excellent thermal flying qualities. The E-Typhon's flight is very agile and maneuverable, it will go where you want it to go like a dream. It is capable of flying in almost all conditions and is equipped with ailerons, fin, elevator and for the electric version with...
RC Motorgliders - Marabu approx 2.75m Red/Red ARF TOPModeL CZ - FLASH RC RC Motorgliders - Marabu approx 2.75m Red/Red ARF TOPModeL CZ - FLASH RC 2
Last items in stock
RC Motor Gliders: More Flight Time, Less Hassle

Marabu approx 2.75m Red/red ARF TOPModeL CZ

TOPMODEL CZ
213-020125-RED/RED
€299.17
The Marabu from Topmodel CZ is a high performance motorglider designed for recreational flying and may even be suitable for competition.experienced pilots will be surprised by its excellent flying and scraping qualities, even in light thermal conditions, the horizontal tail is pendular for more fun and precision.The Marabu is equipped with flaps: you can...
RC gliders - E-Typhoon PLUS Full carbon 2.90m yellow/black & white RCRCM - FLASH RC RC gliders - E-Typhoon PLUS Full carbon 2.90m yellow/black & white RCRCM - FLASH RC 2
Out-of-Stock
RC Motor Gliders: More Flight Time, Less Hassle

E-Typhoon PLUS Full carbon 2.90m yellow/black & white RCRCM

RCRCM
164-E-TYPHOON-PLUS-03-Carbon
€832.50
Motorglider for intermediate to experienced pilots, the E-Typhon PLUS from RCRCM is the electric version of the Typhoon Plus, with a wingspan of 2.90m.Carbon fiber composite molded glider, the finish is very clean, and the flight qualities are very good.It is also used in F3F, thanks to its possibilities of fast flight (possible to add ballast).Proposed...
View
RC Motorgliders - E-Tomcat Full carbon 2.60m red & black RCRCM - FLASH RC RC Motorgliders - E-Tomcat Full carbon 2.60m red & black RCRCM - FLASH RC 2
Out-of-Stock
RC Motor Gliders: More Flight Time, Less Hassle

E-Tomcat Full carbon 2.60m red & black RCRCM

RCRCM
164-E-TOMCAT-CARB-01
€607.50
The RCRCM E-Tomcat is a motorglider for intermediate to experienced pilots. The E-Tomcat is an expert in sustained slope flying, F3F type, and the wings are equipped with flaps and ailerons allowing all types of mixes for precise tricks and landings. The entire glider is made of carbon fiber to obtain more rigidity, a stronger wing skin with little extra...
View
RC Motorgliders - Grafas approx.3.07m blue/yellow ARF TOPModeL CZ - FLASH RC RC Motorgliders - Grafas approx.3.07m blue/yellow ARF TOPModeL CZ - FLASH RC 2
Last items in stock
RC Motor Gliders: More Flight Time, Less Hassle

Grafas approx.3.07m blue/yellow ARF TOPModeL CZ

TOPMODEL CZ
213-0209101BY
€395.83
The Grafas from Topmodel CZ is a motorglider with sound and stable flying characteristics. Equipped with flaps, you can "easily" land at the foot. The three-piece wing is constructed from balsa/CTP with D-box and is covered with Oracover. The fuselage, painted in white, is molded in carbon reinforced fiberglass. The pendulum stabilizer is made of balsa...
RC Motorgliders - Pegasus (cross stack) approx.2.00m red ARF TOPModeL CZ - FLASH RC RC Motorgliders - Pegasus (cross stack) approx.2.00m red ARF TOPModeL CZ - FLASH RC 2
Out-of-Stock
RC Motor Gliders: More Flight Time, Less Hassle

Pegasus (cross stack) approx.2.00m red ARF TOPModeL CZ

TOPMODEL CZ
213-02090.2ARF-RED
€205.00
The Pegasus from Topmodel CZ is a performance motorglider designed for competition.experienced pilots will be surprised by its excellent flying and scraping qualities, even in small conditions.the Pegasus is equipped with flaps: you can mix and match them to use them as curvature flaps in ascents, as well as brakes for landings. The lightweight fuselage...
View
RC Motorgliders - TILIA 25 Plus Full Carbon (F5J-400) approx. 2.5m - FLASH RC RC Motorgliders - TILIA 25 Plus Full Carbon (F5J-400) approx. 2.5m - FLASH RC 2
Out-of-Stock
RC Motor Gliders: More Flight Time, Less Hassle

TILIA 25 Plus Full Carbon (F5J-400) approx. 2.5m

TILIA MODEL
283-T25PLUS-FC
€624.17
FLASH RC, exclusive distributor of TILIA MODEL gliders, offers you this beautiful Tilia 25 Plus Full Carbon, made in Czech Republic.this model is specially designed for the F5J-400, but also for a more "leisure" use.the manufacturing quality is excellent, the wings are molded in Biaxial carbon fiber under vacuum on a XPS core, with carbon reinforcements....
View
RC Motorgliders - Super Dimona TC-80 Aeronaut 2,14m - FLASH RC RC Motorgliders - Super Dimona TC-80 Aeronaut 2,14m - FLASH RC 2
Last items in stock
RC Motor Gliders: More Flight Time, Less Hassle

Super Dimona TC-80 Aeronaut 2.14m

AERONAUT
063-134500
€199.17
The Super Dimona is the embodiment of elegance, advanced technology and flight performance.the prototype was built in the Dachau H36 Dimona, near Munich - a development of Ing WD Hoffmann. Flying with the Super Dimona is very easy. The most beautiful thing is probably to fly up to 20m height, the throttle at 1/3, in order to enjoy passages of a striking...
RC Motorgliders - E-Sunbird all fiber approx.1.50m red & black RCRCM - FLASH RC RC Motorgliders - E-Sunbird all fiber approx.1.50m red & black RCRCM - FLASH RC 2
Out-of-Stock
RC Motor Gliders: More Flight Time, Less Hassle

E-Sunbird all fiber approx.1.50m red & black RCRCM

RCRCM
164-E-SUNBIRD-01
€291.58
The E-Sunbird is a motorglider for experienced pilots, offering outstanding performance and excellent thermal flying qualities. The E-Sunbird is very agile and maneuverable and will go where you want it to go like a dream. It is capable of flying in almost all conditions and is equipped with ailerons, flaps, vertical stabilizer, elevator and motor....
View
RC Motorgliders - Kit to build Robbe Primo motorglider/glider approx.1.53m - FLASH RC RC Motorgliders - Kit to build Robbe Primo motorglider/glider approx.1.53m - FLASH RC 2
Last items in stock
RC Motor Gliders: More Flight Time, Less Hassle

Robbe Primo motorglider/glider construction kit approx.1.53m

ROBBE
232-2554
€112.49
2 axis motorglider (or glider) in traditional balsa structure to build. The parts (ribs, fuselage sides ...) are pre-cut by laser, which greatly facilitates the construction. In addition to an illustrated manual in French, you will find an online help on the manufacturer's website giving you precious advice for the assembly, but also for the first flight....

Customers who bought this product also bought:

Cones for folding propellers - Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis - FLASH RC Cones for folding propellers - Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis - FLASH RC 2
Out-of-Stock
Cones for folding propellers

Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis

Flash RC
259-CZ30-3.2
€12.42
Ventilated aluminium cone Ø30mm (CNC machined) Z-shaped blade holder for 3.2mm axis.Z-shaped blade holder allowing the blades to fold along the fuselage in an aesthetic and aerodynamic wayDimensions:Center distance between blades: 37mm Blade feet : 8mm Blade axis diameter : 3mm Height cone : 23mm Cone diameter: 30mm For motor shaft: 3.2mm
View

Customers who bought this product also bought:

Cones for folding propellers - Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis - FLASH RC Cones for folding propellers - Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis - FLASH RC 2
Out-of-Stock
Cones for folding propellers

Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3.2mm axis

Flash RC
259-CZ30-3.2
€12.42
Ventilated aluminium cone Ø30mm (CNC machined) Z-shaped blade holder for 3.2mm axis.Z-shaped blade holder allowing the blades to fold along the fuselage in an aesthetic and aerodynamic wayDimensions:Center distance between blades: 37mm Blade feet : 8mm Blade axis diameter : 3mm Height cone : 23mm Cone diameter: 30mm For motor shaft: 3.2mm
View
Cones for folding propellers - Ventilated aluminium cone Ø30mm (CNC machined) with Z-shaped blades for 3mm axis - FLASH RC Cones for folding propellers - Ventilated aluminium cone Ø30mm (CNC machined) with Z-shaped blades for 3mm axis - FLASH RC 2
Last items in stock
Cones for folding propellers

Ø30mm ventilated aluminium cone (CNC machined) with Z-shaped blades for 3mm axis

Flash RC
259-CZ30-3
€12.42
Ø30mm ventilated aluminium cone (CNC machined) Z-shaped blade holder for 3mm axis.Z-shaped blade holder allowing the blades to fold along the fuselage in an aesthetic and aerodynamic wayDimensions:Blade center distance: 37mm Blade feet : 8mm Blade axis diameter : 3mm Height cone : 23mm Cone diameter: 30mm For motor shaft: 3mm
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text