CTP support for adhesives

MICROMOT MS 4 Proxxon Machine ViseCast aluminum. Three milled support surfaces. With groove, also suitable for the TBM 220 bench drill, MB 140/S and MB 200 drill stands. Vertical and horizontal prism for round materials. Jaw width 50 mm. Jaw height 10 mm. Max. spacing 34 mm.

273-28132

€12.67

Workshop tools

Proxxon NG 5/E - Transfo MICROMOT 5A 60VA with regulation

MICROMOT NG 5/E Proxxon TransformerCompact housing made of NORYL (heat resistant, approved for transformers).progressive speed control with feedback effect for optimal speed and high torque at low rpm. 3 plugs for MICROMOT plugs. One universal socket for banana plugs (Ø 4 mm). Main switch for disconnection. Red LED light to indicate that the unit is ready...

273-28704

€62.49

Workshop tools

SCRIBING PEN+PUNCH

Flash RC

038-01692685

€18.83

Workshop tools

Proxxon 60/EF 28514 Outil multifonction 40 W

273-28514

€66.66

Workshop tools

Proxxon STS/E - 100W jig saw with control in cabinet with 4 blades

Proxxon STS/E Super Jig SawExact cutting and precision: Heavy-duty zinc die-cast drive head for exact cutting and adjustment. Fiberglass-reinforced POLYAMIDE center housing. Special balanced DC motor, powerful, quiet and durable. Progressive adjustment (full wave electronic). Cutting table with stop (tiltable up to 45°). Particularly suitable for curved...

273-28530

€95.75

Milling cutter 90° guide L70 Diam. 20mm PERMA-GRIT

Out-of-Stock

Workshop tools

Milling cutter 90° guide L70 Diam. 20mm PERMA-GRIT

These new milling cutters have been developed for leading aircraft manufacturers and FORMULA 1 racing teams. They are CNC machined from solid steel bars to guarantee perfect balance. The tungsten carbide cones are brazed for longevity and efficiency when cutting composite materials, etc...

038-119FC8

€21.58

View

Workshop tools

FRAISE 82° GUIDE #40 DIAM 13mm PERMA-GRIT

038-119FC3

€16.75

Workshop tools

Proxxon MP 400 - 100W micro router with 2.4 - 3 - 3.2 mm collets

Proxxon MICRO-Tool MP 400For making profiles and grooves, for milling, chamfering, cutting and parting off, for making frames and cut-outs. Allows precise edge and longitudinal cuts (e.g. in model making for doors, shutters and housings). Powerful dust protected motor with toothed belt drive. Double ball bearing spindle. Accessory compartment with...

273-27050

€149.92

Workshop tools

Proxxon Precision lathes FD 150/E

Proxxon FD 150/E Precision Lathe2-speed belt drive with additional electronic control allows spindle speeds up to 5,000 rpm. For flat turning, longitudinal turning, hollow turning, tapered turning, tapping and drilling. Complete with 3-jaw chuck and rotating tip. Centre distance 150 mm. Height of tips 55 mm. Height above the support 33 mm.

273-24150

€503.25

Workshop tools

Proxxon DS 460 - 2 Speed Cutting Saw

Proxxon DS 460 2-speed cutting sawSolid construction: Feet with vibration damping made of cast iron, cleanly CNC-worked and powder-coated. For safe positioning and vibration-free operation. With extremely light magnesium arm reducing the weight of the moving mass compared to die-cast aluminum by about 40%! Extremely light and strong magnesium saw arms...

273-27094

€416.58

BURR 100° GUIDE #30 DIAM 11.5mm PERMA-GRIT - FLASH RC

Workshop tools

100° GUIDE #30 DIAM 11.5mm PERMA-GRIT

038-119LC2

€24.92

100° GUIDE #30 DIAM 11.5mm PERMA-GRIT

Workshop tools

Proxxon PS 13 - Non-rotating linear sander 12V 1A delivered with 8 pads + 3 sanding sheets

PS 13 Proxxon linear non-rotating sander.ideal for working on surfaces in cavities, grooves, compartments and nooks and crannies.linear (non-rotating) sanding. Durable special DC motor. Housing made of glass-fiber reinforced POLYAMIDE. The sander is supplied with 4 straight and 4 angled sanding pads of different shapes, with 3 self-adhesive sanding sheets...

273-28594

€20.75

Workshop tools

COFFRET PERCEUSE SCIE PONCEUSE

AVIO & TIGER

066-33000610156

€33.25

Workshop tools

Proxxon FMZ - Precision machine vice with clamp, opening 70 mm jaws 75 mm

FMZ Proxxon Precision Machine ViseFasten quickly and securely to any workbench or tabletop up to 60 mm thick. It can also be attached to any work surface with 2 standard screws. Its lockable ball joint allows it to be rotated and oriented in any direction. 75 mm jaws with protective coating for fragile parts. Opening 70 mm. Weight 1,6 kg.

273-28608

€39.92

Workshop tools

Proxxon KG 80 - Mitre saw 2 to 45° 4000 rpm

Proxxon KG 80 Miter SawThis miter saw, already combined with a circular saw, is designed to cut cleats, battens, profiles, corners and panels of paneling, siding and boards to precise length. In addition, you can saw plastic and aluminum. For mitre cuts: not the clamping head (firmly fixed in the clamping device), but the round table with the workpiece is...

273-27160

€233.25

Workshop tools

Proxxon Replacement cutting wire for THERMOCUT 12/E, 10 pieces

MS-8510MG Multiplex servo, delivered with rudder pedals + screws.this ultra light 5g servo (excluding cable) will be ideal for use on an indoor model. It is equipped with metal gears! and it is delivered with a long servo arm.

273-28082

€12.17

Proxxon Replacement cutting wire for THERMOCUT 12/E, 10 piecesLightly deformable and therefore ideal for model making.

Customers who bought this product also bought:

Motors and motor accessories for kits - Propeller 13x4 Timber X - FLASH RC

Out-of-Stock

E-Flite aircraft parts

Propeller 13x4 Timber X

E-Flite

110-EFLP1304E

€5.83

The 13x4" E-Flite propeller is EFLP1304E and is compatible with the Timber X and Timber X Night EFL13850, EFL13875, EFL3850, EFL3875

View

Out-of-Stock

Cyano Depron/Styro/Polystyrene

Cyano Foam Glue (Elapor, Depron) 20g EVERGLUE

EVERGLUE

199-650005

€4.99

Cynao glue, medium viscosity for Elapor, Styrodur, Dépron, Hypodur foams ...

View

Servos - Servo Micro Multiplex MS-8510MG (5g, 1.0 kg.cm, 0.06s/60°) - FLASH RC

RC Servos: Precision & Reliability for Modeling

Micro Servo Multiplex MS-8510MG (5g, 1.0 kg.cm, 0.06s/60°)

Multiplex

064-1-01724

€16.58

GWS Slow Fly - GWS 8x4.3' propeller - FLASH RC

Pack

GWS Direct Drive

propeller GWS 8x4.3' - set of 10

GWS

P023-SF8x4.3

€8.75

Pack of low-cost propellers for slow-flying Indoor and Park Flyer models.

Servos - Dualsky DS169 micro analog servo (9g, 2.8kg/cm, 0.06s/60°) - FLASH RC

Servos - Dualsky DS169 micro analog servo (9g, 2.8kg/cm, 0.06s/60°) - FLASH RC 2

RC Servos: Precision & Reliability for Modeling

Micro Dualsky DS169 analog servo (9g, 2.8kg/cm, 0.06s/60°)

DUALSKY

016-DS169

€24.16

The Dualsky DS169 micro servo is particularly suitable for F3K, F5K and RES gliders

Wood Glue - ZAP-A-GAP - Cyano Special Wood - 28 gr PACER ZAP - FLASH RC

Wood/glass glue

ZAP-A-GAP - Wood Cyano - 28 gr PACER ZAP

ZAP

272-S165PT02

€8.29

ZAP-A-GAP thick cyanoacrylate adhesive, 28gr - Fills joints. - Allows 7 to 10 seconds of positioning. - Dries in 20 seconds. - Can be accelerated with "Zip Kicker". -Best performance on: aluminum and other metals, pottery, wood, ceramic, rubber and most plastics. - 28 grams bottle.

Cyano Elapor/EPP/Wood

Filler powder for cyano glue 20g KAVAN

SERVO HITEC HS-65MGHITEC offers a brand new servo that will delight owners of 1/18 electric cars, small racers or electric helicopters size 450. The HS-65MG has a very small housing and develops a torque of 2,2kg.cm under 6V. With the metal pinions, the HS-65MG will be very resistant to the steering of 1/18 cars ! It is also equipped with reinforced...

210-KAV56.9980.EN

€2.49

KAVAN powder filler for cyano glue 20g

Servos - Hitec HS-65MG+ micro servo (12g, 2.2kg.cm, 0.10s/60°) - FLASH RC

RC Servos: Precision & Reliability for Modeling

Hitec HS-65MG+ micro servo (12g, 2.2kg.cm, 0.10s/60°)

HITEC

064-112066

€24.92

Customers who bought this product also bought:

Wood/glass glue

ZAP-A-GAP - Wood Cyano - 28 gr PACER ZAP

ZAP

272-S165PT02

€8.29

Out-of-Stock

Hinges

CHARNIERE CYANO PETITE 14x10mm 20pcs

038-0661324

€2.33

The easy-to-install hinge! Simply slip the hinge into its housing, pour a drop of cyano fluid over it, and off you go! Dimensions: 14x10mm. Supplied in packs of 20.

View

Out-of-Stock

E-Flite aircraft parts

Propeller 13x4 Timber X

E-Flite

110-EFLP1304E

€5.83

The 13x4" E-Flite propeller is EFLP1304E and is compatible with the Timber X and Timber X Night EFL13850, EFL13875, EFL3850, EFL3875

View

Out-of-Stock

RC Servos: Precision & Reliability for Modeling

GO-03 servo 3,7g

210-KAV20.0037

€4.46

Piko Servo 3,7g with plastic gears for small electrolytes. Thrust 0,8 kg / cm, speed 0,14s / 60st at 4,8 V, dimensions 19,8x8,4x21,3 mm, power 4,8-6,0V.

View

GOLD 2/2.3/3/3.5/4/5/5.5/6/8 socket - SHORT 2 mm PK socket 2 pairs - RC FLASH

OR 2/2.3/3/3.5/4/5/5.5/6/8 socket

Socket PK 2 mm SHORT 2 pairs

038-0184077SHORT

€1.25

High quality gold contact to be connected to silicone wires.

Cyano Elapor/EPP/Wood

Liquid cyano glue 20g KAVAN

210-KAV56.9973.EN

€3.25

Low viscosity/liquid cyano glue.20 gr. / KAVAN

RC Servos: Precision & Reliability for Modeling

GO-05 servo 5g

High quality HACKER brushless controller, suitable for the most demanding applications. Easy to use, the parameters can be programmed via the throttle of the radio control or with an optional USB -> PC programming interface (X-Pro-USB interface, offering more possibilities in the programming) A safe and reliable value for your electric models.

210-KAV20.005

€4.46

Piko Servo 5g with plastic gears for small electrolytes and gliders. Thrust 0,8 kg / cm, speed 0,14s / 60st at 4,8 V, dimensions 21,5x11,8x20,9 mm, power 4,8-6V.

Brushless

20A Hacker Controller - X-20-Pro with BEC

HACKER

102-87100002

€40.83

Cyano Elapor/EPP/Wood

Medium cyano glue 20g KAVAN