Workshop tools - Proxxon NG 2/E - Transfo MICROMOT 2A 24VA with regulation - FLASH RC
Workshop tools - Proxxon NG 2/E - Transfo MICROMOT 2A 24VA with regulation - FLASH RC

Proxxon NG 2/E - Transfo MICROMOT 2A 24VA with regulation

Last items in stock
€33.25
Tax included
Transformer MICROMOT NG 2/E ProxxonHousing made of NORYL (very heat resistant, approved for transformers) with plug for MICROMOT plugs (with polarity protection). The red LED indicates that the device is ready for use. PTC (Positive Temperature Coefficient) against overload: no automatic restart of the device, after cooling down the plug has to be pulled out for a short time. With compartments for storing accessories. Foldable hoop: permanent support for the MICROMOT device. Infinitely variable speed control with feedback effect for an adapted speed and high torque at low speed.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

Technical data:

230 V. Power 2 A at 16 V no load and 12 V load. Weight 1.000 g. Protective insulation class 2.

Please note:

For handheld electrical devices, the stated wattage is in accordance with the international standard IEC-745-1. This standard defines the current consumption (not the power) with the motor overheated just before the axis is blocked. These are values which in practice are never reached or only for a short time. All recommended transformers are more generously dimensioned.
The drilling and milling machine is not included in the delivery.

273-28707
4006274287075
4006274287075
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

Workshop Tools - Proxxon STS/E - 100W jig saw with control in cabinet with 4 blades - FLASH RC
Last items in stock
Workshop tools

Proxxon STS/E - 100W jig saw with control in cabinet with 4 blades

PROXXON
273-28530
€95.75
Proxxon STS/E Super Jig SawExact cutting and precision: Heavy-duty zinc die-cast drive head for exact cutting and adjustment. Fiberglass-reinforced POLYAMIDE center housing. Special balanced DC motor, powerful, quiet and durable. Progressive adjustment (full wave electronic). Cutting table with stop (tiltable up to 45°). Particularly suitable for curved...
Workshop Tools - Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film - FLASH RC
Last items in stock
Workshop tools

Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film

PROXXON
273-27080
€104.08
Proxxon THERMOCUT 230/E Hot Wire CutterFor model making by architects, designers, decorators, artists (also for practical work in applied art) and for prototype construction. Stable frame and 390 x 280 mm surface made of aluminum composite material. Structured surface, allowing an even gliding of the part to be cut. The screen-printed frame and the design...
Workshop tools - Proxxon UHZ - Universal holder with clamp, neck 20 mm for all MICROMOT - FLASH RC machines
Last items in stock
Workshop tools

Proxxon UHZ - Universal holder with clamp, 20 mm neck for all MICROMOT machines

PROXXON
273-28610
€20.75
Proxxon UHZ universal holder with ball joint. 20 mm collar for MICROMOT devices such as FBS 240/E, FBS 12/EF, IBS/E, LBS/E, MICROMOT 50, 50/E and 50/EF. Zinc die-cast. With olive for quick and safe attachment to workbenches and table tops up to 60 mm thick. It can also be fixed to any work surface with 2 standard screws. Note: The industrial grinder IBS/E...
Workshop Tools - Proxxon KT70 - Micro coordinate table for MB 140/S and TBM 220 with flanges and fixtures - FLASH RC
Last items in stock
Workshop tools

Proxxon KT70 - Micro coordinate table for MB 140/S and TBM 220 with flanges and fixtures

PROXXON
273-27100
€74.92
MICRO coordinate table KT 70 ProxxonHigh tensile aluminum (densified surface) with adjustable dovetail guides.3 longitudinal T-slots (MICROMOT standard 12 x 6 x 5 mm). Sliding rule for easy transverse positioning of the carriage. Rollers with vernier repositionable on zero: 1 turn = 1 mm, 1 graduation = 0,05 mm of advance. Supplied with clamps and...
Workshop Tools - Proxxon BBS/S - Compact belt sander 150W sanding surface 60x 40 mm in cabinet - FLASH RC
Last items in stock
Workshop tools

Proxxon BBS/S - Compact belt sander 150W sanding surface 60x 40 mm in case

PROXXON
273-28526
€133.25
BBS/SM special DC motor, powerful, quiet and durable, the sanding belt is mounted on the left side of the tool, which allows to work on surfaces up to the corners. Precise adjustment by means of rollers prevents the belt from escaping from the side. Easy belt exchange without additional tools thanks to the clamping system. Housing made of glass fiber...
Workshop tools - Proxxon TSG 250/E - Disc sander Ø 250 mm max sanding HT 135 mm + table and regulation - FLASH RC
Last items in stock
Workshop tools

Proxxon TSG 250/E - Disc sander Ø 250 mm max sanding HT 135 mm + table and regulation

PROXXON
273-28060
€240.83
Proxxon TSG 250/E Disc SanderFor sanding longitudinal edges, end edges, rounding, mitering and right-angled flat surfaces.For working on softwood, hardwood, non-ferrous metal, steel, plastic (also Plexiglas and fiberglass), cork and rubber. Stable construction:Main housing made of ribbed cast aluminum (no tube or pressed sheet metal structure). Flat...
Workshop Tools - Proxxon MBS 240/E - Micro band saw HT max cut 85 mm table 220 x 200 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon MBS 240/E - Micro band saw HT max cutting height 85 mm table 220 x 200 mm

PROXXON
273-27172
€275.83
Proxxon MICRO-BAND SAW MBS 240/ESolid housing made of ribbed cast aluminum (no tubular steel or pressed sheet metal construction). Stable table with flat milled work surface, miter slot. (Tiltable table top at 45° for mitre cuts). Band guide mounted on 3 bearings and adjustable height. Adjustable for different blade widths. Quiet 220 volt motor drive with...

Customers who bought this product also bought:

Customers who bought this product also bought:

Workshop Tools - Proxxon PS 13 - Non rotating linear sander 12V 1A delivered with 8 pads + 3 sanding sheets - FLASH RC
Last items in stock
Workshop tools

Proxxon PS 13 - Non-rotating linear sander 12V 1A delivered with 8 pads + 3 sanding sheets

PROXXON
273-28594
€20.75
PS 13 Proxxon linear non-rotating sander.ideal for working on surfaces in cavities, grooves, compartments and nooks and crannies.linear (non-rotating) sanding. Durable special DC motor. Housing made of glass-fiber reinforced POLYAMIDE. The sander is supplied with 4 straight and 4 angled sanding pads of different shapes, with 3 self-adhesive sanding sheets...
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text