Zepsus DualBat Magnetic Switch 20A

ZEPSUS 20A Dual Battery Magnetic SwitchSmall, strong and super reliable.Designed for F5J competition gliders, where safety and low weight are key. Small, strong and extremely reliable, thanks to its redundant function.This is a very small power switch designed for F5J competition glider models. The dual battery provides redundant functionality, which again guarantees safety. The switch simply selects the battery or BEC with the highest voltage. If the voltage is the same, the power comes from both batteries or BECs. If one battery or BEC is removed or shorted, it will not affect the other battery or the output voltage. The idea is to use the 1S Lipo / 4S NiMH or 2S RX lipo depending on whether the RX lipo is to be the main RX battery or the backup battery (1S Liop / 4S NiMH). It is of course possible to use other sources, for example. 5.5 volt nozzle. As with all other switches, with this switch your RC model can be activated or deactivated without you needing to access it internally. Simply place a magnet on the switch on the outside of the model and it will turn on. To turn it off, pass the magnet by the switch again. The switch has a very low power consumption in the locked state. The power consumption is so low that the switch can be connected to a 1000mAh battery for several years without discharge. The switch has a built-in fail-safe function. It remembers its state for at least 10 seconds if it is disconnected from the battery. This will protect the switch from power problems caused by poor battery connection, etc.