Planes & gliders

Radios & electro.

Workshop %Deals

JETI - R14 Duplex EX 2,4GHz Jeti 14 Channel Receiver - RC FLASH

JETI - R14 Duplex EX 2,4GHz Jeti 14 Channel Receiver - RC FLASH

R14 Duplex EX 2,4GHz Jeti 14 Channel Receiver

Last items in stock

€141.58

Tax included

14 channels JETI receiver with DUPLEX 2,4GHZ technology. The JETI 2.4GHZ technology also allows the use of telemetry with the use of the JETI BOX to visualize the information transmitted during the flight.

Technical characteristics

Weight: 30g
Dimensions: 62×38×16 mm
Voltage: 3.2-8.4V
Number of channels: 14
Frequency: 2.4-2.4835 Ghz
Power consumption: 40 mA
Antenna length: 2×400mm
Sensitivity: -106dBm
Protocol: DUPLEX 2.4GHz EX, EX Bus

French manual

Reference 308-JDEX-R14

EAN13 8595245908560

MPN 8595245908560

No reviews

Comments (0)

No customer reviews for the moment.

16 other products in the same category:

JETI - Jeti 12 Duplex EX 2.4Ghz Receiver - RC FLASH

JETI - Jeti 12 Duplex EX 2.4Ghz Receiver - RC FLASH 2

Out-of-Stock

JETI

REX 12 Duplex EX 2.4Ghz Jeti 12 Channel Receiver

The REX 12 Duplex 2.4EX JETI is part of the new range of REX receivers, equipped with a 32 bit processor, faster than their predecessors. Compact and lightweight, this 12-channel receiver supports PPM, EXBUS, EX, UDI protocols and can accommodate up to 3 telemetry probes, eliminating the need for an expander in most cases. In addition, the REX 12 is...

View

JETI - R18 EPC Duplex EX 2,4GHz Jeti 18 Channels + 1 SAT - FLASH RC

JETI

R18 EPC Duplex EX 2,4GHz Jeti 18 Channels + 1 SAT receiver

The DUPLEX EX series receivers are designed to work with the HF modules of the DUPLEX and DUPLEX EX series in the 2.4 GHz bandJETI 18-channel receiver with DUPLEX EX 2.4GHZ technology. Usable only with JETI DUPLEX 2.4GHz and DUPLEX EX 2.4GHz transmitting modules. JETI 2.4GHZ technology also allows the use of telemetry with the use of the JETI BOX to view...

JETI - Jeti 7 Duplex EX 2.4Ghz Receiver - FLASH RC

JETI - Jeti 7 Duplex EX 2.4Ghz Receiver - FLASH RC 2

JETI

REX 7 Duplex EX 2.4Ghz Jeti 7 Channel Receiver

The REX 7 Duplex 2.4EX JETI is part of the new range of REX receivers, equipped with a 32 bit processor, faster than their predecessors. Compact and lightweight, this 7-channel receiver supports PPM, EXBUS, EX, UDI protocols and can accommodate up to 3 telemetry probes, which in most cases eliminates the need for an expander.

JETI - REX 6 ASSIST Duplex 2.4EX receiver JETI - FLASH RC

JETI

REX 6 ASSIST Duplex 2.4EX JETI receiver

DUPLEX 2.4EX REX 6 Assist Receiver This JETI REX ASSIST receiver has an integrated 3-axis gyro for 3-axis stabilization of your model.integrated telemetry: 3-axis rotation angle, G-Force, temperature integrated ASSIST stabilization system with stabilization + heading hold + trainer mode for aircraft/glider and multi-copter models. the stabilized EX bus...

JETI - REX 7 Slim ASSIST Duplex EX 2.4Ghz Jeti 7 Channel Receiver - RC FLASH

JETI

REX 7 Slim ASSIST Duplex EX 2.4Ghz Jeti 7 Channel Receiver

308-JDEX-RR7S-A

This type of receiver of the REX SLIM series with 7 servo outputs. The receivers are specially designed for aircraft with a very small fuselage. Their compact dimensions are suitable for all pilots who are limited by space in the model (e.g. F3J, F5J, etc.). This type of receiver is in the version with stabilization support JETI ASSIST.

JETI - Jeti 10 Duplex EX 2.4Ghz Receiver - FLASH RC

JETI - Jeti 10 Duplex EX 2.4Ghz Receiver - FLASH RC 2

JETI

REX 10 Duplex EX 2.4Ghz Jeti 10 Channel Receiver

The REX 10 Duplex 2.4EX JETI is part of the new range of REX receivers, equipped with a 32 bit processor, faster than their predecessors. Compact and lightweight, this 10-channel receiver supports PPM, EXBUS, EX, UDI protocols and can accommodate up to 3 telemetry probes, which in most cases eliminates the need for an expander.

JETI - R5L Duplex EX 2.4GHz Jeti 5 Channel Receiver - RC FLASH

JETI

R5L Duplex EX 2.4GHz Jeti 5 Channel Receiver

5 channel JETI receiver with normal range, suitable for all models. Compatible with JETI EX & EX Bus protocols. 2.4GHZ JETI technology also allows the use of telemetry with the use of the JETI BOX to view the information transmitted during the flight.

JETI - RSAT 900 Duplex EX Receiver Jeti - FLASH RC

JETI - RSAT 900 Duplex EX Receiver Jeti - FLASH RC 2

JETI

RSAT 900 Duplex EX Jeti receiver

308-JDEX-RS-900

The JETI DUPLEX Rsat 900MHz satellite receiver is specially designed for the DC-24 and DS-24 which transmit in 900MHz in backup mode.Features of the RSAT 900:- expander for sensors- supports PPM, EX BUS, EX, UDI protocols- possibility to program the output channels- compact size- full range- flat antennas for better reception- programmable with the...

JETI - REX 9 Slim Duplex EX 2.4Ghz Jeti 9 Channel Receiver - RC FLASH

JETI

REX 9 Slim Duplex EX 2.4Ghz Jeti 9 Channel Receiver

This type of receiver of the REX SLIM series with 9 servo outputs. The receivers are specially designed for aircraft with a very small fuselage. Their compact dimensions are suitable for all pilots who are limited by space in the model (e.g. F3J, F5J, etc.).

JETI - Jeti 6 Duplex EX 2.4Ghz Receiver - RC FLASH

JETI - Jeti 6 Duplex EX 2.4Ghz Receiver - RC FLASH 2

JETI

REX 6 Duplex EX 2.4Ghz Jeti 6 Channel Receiver

The REX 6 Duplex 2.4EX JETI is part of the new range of REX receivers, equipped with a 32 bit processor, faster than their predecessors. Compact and lightweight, this 6-channel receiver supports PPM, EXBUS, EX, UDI protocols and can accommodate up to 3 telemetry probes, which in most cases eliminates the need for an expander.

JETI - RSAT 900NG Duplex EX Receiver Jeti - FLASH RC

JETI - RSAT 900NG Duplex EX Receiver Jeti - FLASH RC 2

Out-of-Stock

JETI

RSAT 900NG Duplex EX Jeti receiver

308-JDEX-RSNG-900

View

JETI - REX 3 A40 Duplex 2.4EX Jeti 3 Channel Receiver - RC FLASH

JETI - REX 3 A40 Duplex 2.4EX Jeti 3 Channel Receiver - RC FLASH 2

JETI

REX 3 A40 Duplex 2.4EX Jeti 3 Channel Receiver

308-JDEX-RR3-A40

The R3 Jeti Duplex 2.4EX is a 3 way receiver with 40cm antenna and end amplifier for better reception. Ultra light, it is suitable for all models. It is compatible with DUPLEX 2.4EX, EX Bus, UDI and PPM protocols. The R3 Jeti can receive telemetry probes and the data will be displayed either on a Jeti Box or on the Jeti DS/DC transmitters. Version with...

JETI - R7 NANO Duplex 2.4GHz EX Jeti 7 Channel Receiver - RC FLASH

JETI - R7 NANO Duplex 2.4GHz EX Jeti 7 Channel Receiver - RC FLASH 2

JETI

R7 NANO Duplex 2.4GHz EX Jeti 7 Channel Receiver

The R7 Nano Ex Jeti receiver is especially designed for small indoor models. The R7 Nano is the smallest and lightest of the Jeti receiver range. It weighs only 1g! (2g with the thermo jackets). This receiver has no plugs. The servos must be soldered directly to the receiver, which ensures a minimum mass of the whole.

JETI BOX PROFI MOUNTING KIT

JETI

JETI BOX PROFI MOUNTING KIT

Mounting kit JB profiThis mounting kit is designed for the mechanical and electrical connection between the JETIBOX Profi and the transmitter. Connections: red: plus black: minus yellow: plus PPM

JETI - R9 Duplex EX 2,4GHz Jeti 9 Channel Receiver - RC FLASH

JETI

R9 Duplex EX 2.4GHz Jeti 9 Channel Receiver

The DUPLEX EX series receivers are designed to work with the HF modules of the DUPLEX and DUPLEX EX series in the 2.4 GHz bandJETI 9-channel receiver with DUPLEX EX 2.4GHZ technology. Only usable with JETI DUPLEX 2.4GHz and DUPLEX EX 2.4GHz transmitting modules. JETI 2.4GHZ technology also allows the use of telemetry with the use of the JETI BOX to view...

JETI - Jeti 2,4GHz Duplex Antenna - FLASH RC

JETI

Jeti 2.4GHz Duplex Antenna

Customers who bought this product also bought:

Charging accessories - XT60 charging/balancing board for 2x Lipo 2-8S EV PEAK - FLASH RC

Out-of-Stock

Charger accessories

XT60 charging/balancing board for 2x Lipo 2-8S EV PEAK

205-Dual-Board-8S

Charging and balancing board with DEANS/T-PLUG and JST-XH socket for parallel charging of up to two LiPo batteries from 2 to 8S.The board has two 40A overcurrent fuses and two sets of resettable fuses to protect the battery cells.You can also charge a single battery.To charge two batteries at the same time, make sure that the batteries have the same...

View

Chargers accessories - 4 in 1 balancing board : JST-XH, TP/FP, HP/PQ, EH Ultra Power - FLASH RC

Chargers accessories - 4 in 1 balancing board : JST-XH, TP/FP, HP/PQ, EH Ultra Power - FLASH RC 2

Out-of-Stock

Charger accessories

4-in-1 balancing board: JST-XH, TP/FP, HP/PQ, EH Ultra Power

4 in 1 balancing board : JST-XH, TP/FP, HP/PQ, EH 2-6S ULTRA POWERCompatible with Dualsky, Kypom or equivalent, Hacker, Multiplex, Thunder Power, Hyperion, Polyquest, Graupner, ...

View

Dual power supplies

Jeti MAX BEC 2 - 12A This appears to be a product name and specification, so it does...

The Max BEC 2 is designed to provide power to the receiver of a model, from a 5/6 NiXx or 2S LIPO power supply.The MAX BEC 2 is a powerful linear regulator (12A continuous / 20A peak) whose output voltage can be chosen among 4 voltages 5.0 / 5.4 / 5.7 / 6.0V thanks to a small jumper.4 LEDs indicate the battery charge level.Inputs: bare wiresOutput to...

MENZ Prop Wood (thermal) - Menz two-blade wood propeller 24x10' - FLASH RC

MENZ Prop Wood (thermal)

Menz two-bladed wood propeller 24x10'.

MENZ two-bladed wood propeller 24x10 "dia. hub : 10mm

2.4GHz S-FHSS/FHSS/T-FHSS FUTABA - R3008SB 2.4Ghz Futaba 8 Channel T-FHSS Receiver - FLASH RC

Out-of-Stock

2.4GHz S-FHSS/FHSS/T-FHSS FUTABA

Futaba R3008SB 2.4Ghz 8 Channel T-FHSS Receiver

R3008SB Futaba 2.4Ghz T-FHSS telemetry receiver, 8 PWM channels. Channel 8 is programmable and can become SBUS, up to 10 SBUS servos can be connected. The R3008SB also has a SBUS 2 port to connect telemetry sensors. It also has an "extra voltage" port to connect a voltage probe.

View

Receiver batteries - Rx LiIon 2S 7.2V 3100mAh Jeti battery - FLASH RC

Receiver batteries - Rx LiIon 2S 7.2V 3100mAh Jeti battery - FLASH RC 2

Receiver batteries

Jeti Rx LiIon 2S 7.2V 3100mAh Battery

Jeti's Rx LiIon batteries are specifically designed to power your receiver and HV servos. These batteries have a long service life and do not need to be balanced during charging. If the current exceeds 150A, a protection circuit is activated, as well as if the voltage of a cell reaches a voltage higher than 5V. Each pack is equipped with a JR socket for...

Brushless - ROXXY PROcontrol 65/8A S-BEC - FLASH RC

Brushless

ROXXY PROcontrol 65/8A S-BEC

ROXXY PROcontrol Brushless is designed to control sensorless brushless electric motors for model aircraft.ROXXY PRO-control drives are equipped with a high-performance S-BEC system (8 A continuous current and 16 A peak current).Their output voltage can be adjusted in steps according to the intended use. (Please note the maximum values in the technical...

Radio Controls - Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10 - FLASH RC

Radio Controls - Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10 - FLASH RC 2

RC Transmitters: Master Every Move

Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10

308-JDEX-TDS16II-CLYL

Jeti DS-16 Gen.2 2.4Ghz 24 channels transmitter, programmable with integrated telemetrySuitable for your airplane, helicopter and boat models.Delivered with a receiver with paper instructions in FrenchMultimode version: you can therefore configure it in mode 1 or mode 2 very easily.We can do it for you free of charge, indicate the mode in the comments of...

Customers who bought this product also bought:

MPX socket - MPX socket 6 pins female (x3) M6 50A original MULTIPLEX - FLASH RC

MPX socket - MPX socket 6 pins female (x3) M6 50A original MULTIPLEX - FLASH RC 2

MPX socket

6-pin female MPX socket (x3) M6 50A original MULTIPLEX

The original Multiplex M6 green female plug, but in an improved version!Supports up to 50A continuous (instead of 35A previously) and up to 100A peak (60A previously) for 30 seconds.Delivered in a bag of 3 pieces.moulded with the authentic MADE IN GERMANY / MPXAnd of course compatible with the "old" Multiplex M6 35A plug.

Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC

Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC 2

RC Servos: Precision & Reliability for Modeling

Micro servo KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°)

KST delivers again with these KST HS08 series competition servos for F5J glider pilots and glider enthusiasts who demand the best! The all-new HS08s are almost as compact as the popular KST X08 series and offer power and performance levels close to those of the X10 Mini servos in an 8mm thick housing.The slim 8mm thick housing is made from 7075 aluminum...

JETI - R9 Duplex EX 2,4GHz Jeti 9 Channel Receiver - RC FLASH

JETI

R9 Duplex EX 2.4GHz Jeti 9 Channel Receiver

The DUPLEX EX series receivers are designed to work with the HF modules of the DUPLEX and DUPLEX EX series in the 2.4 GHz bandJETI 9-channel receiver with DUPLEX EX 2.4GHZ technology. Only usable with JETI DUPLEX 2.4GHz and DUPLEX EX 2.4GHz transmitting modules. JETI 2.4GHZ technology also allows the use of telemetry with the use of the JETI BOX to view...

Other modules & telemetry - USBa adapter for Jeti Duplex - FLASH RC

Other modules & telemetry

USBa adapter for Jeti Duplex

USB interface for updating the firmware of JETI receivers, JETI telemetry sensors and JETI Box

Straps, hooks, brackets - Suspension bracket for Jeti DC/DS transmitter (the pair) - FLASH RC

Straps, hooks, brackets - Suspension bracket for Jeti DC/DS transmitter (the pair) - FLASH RC 2

Out-of-Stock

Straps, hooks, supports

Suspension bracket for Jeti DC/DS transmitter (pair)

Suspension brackets for using the JETI DC/DS-16 and DS-14 without a console (not compatible with DS12). These sturdy, foldable brackets are made of black anodized aluminum and have multiple strap holes to find the perfect balance point for your body type. They screw directly onto the rear vertical face of the JETI duplex dc-16 transmitter.

View

Switch Bec 6A - 5V/5.5V/6V - KAVAN

"Switch Bec" in English is "Bec Switch." However, the word "Bec" in French can mean "beak" (as in a bird's beak), but in the co

Switch Bec 6A - 5V/5.5V/6V - KAVAN

210-KAV32.21515

6A (peak 10A) BEC switch mode power supply to power the receiver and servos.

Carbon tail wheel 50-70CC - FLASH RC

Carbon tail wheel 50-70CC - FLASH RC 2

Out-of-Stock

Cue wheel

Carbon tailwheel 50-70CC

Complete set for carbon tailwheel 50-70cc To mount on aircraft up to 2.4m. Control by spring under the fin.

View

Folding blades - GM Georgi Mirov 6mm - FLASH RC

Cone accessories

GM Georgi Mirov collar 6mm

GM PROP collar machined for all Gerogi Mirov cones+ screws

Servos - Servo mini KST X12-508 HV (20g, 6.2kg.cm, 0.07s/60°) - FLASH RC

Servos - Servo mini KST X12-508 HV (20g, 6.2kg.cm, 0.07s/60°) - FLASH RC 2

RC Servos: Precision & Reliability for Modeling

Mini servo KST X12-508 HV (20g, 6.2kg.cm, 0.07s/60°)

The KST X12-508 is a 12mm thick HV Mini servo motor. Torquey and fast, it will be ideal for use on gliders or gliders but also as a swashplate servo.2S Lipo compatible servoDelivered with original rudder pedals and mounting screws

Radio Controls - Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10 - FLASH RC

Radio Controls - Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10 - FLASH RC 2

RC Transmitters: Master Every Move

Jeti DS16 Gen. 2 Carbon Line Yellow 2.4Ghz Duplex + R10

308-JDEX-TDS16II-CLYL

Jeti DS-16 Gen.2 2.4Ghz 24 channels transmitter, programmable with integrated telemetrySuitable for your airplane, helicopter and boat models.Delivered with a receiver with paper instructions in FrenchMultimode version: you can therefore configure it in mode 1 or mode 2 very easily.We can do it for you free of charge, indicate the mode in the comments of...

FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe

Product added to wishlist

Product added to compare.

iqitcookielaw - module, put here your own cookie law text