FlashRC — Shipping banner
The Odyssey ECL from Art Hobby is a motorglider specially designed for both flat and slope flying. The SD7080 wing profile has been modified for this model, resulting in a light motorglider, very efficient in thermal flight and stable at very low speed. Its weight in flight is about 900g. The fuselage is made of fiberglass, reinforced with carbon and the wings are made of polystyrene with a poplar form.NOTE : The nose is cut at about 35mm. The aileron and flap control surfaces have to be cut out, as do the wing servo housings. Marks are discreetly marked to help you. Last version with flaps and ailerons attached, as well as carbon fin foot and balsa fin.
custom html
To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
Technical specifications
* Specifications
- Wingspan : 2.70m
- Length : 1375 mm
- Empty weight : 590g
- Weight in flight : 900g
- Wing area: 39.2dm² (39.2 sq. ft.)
- Wing profile : SD7080 modified
- Cross tail
- RC functions: fin, elevator, ailerons, flaps, motor
* Plan of the Odyssey ECL

Required elements
- 4x HS65 MG servos (ailerons and flaps)
- Servo wires to connect the wing servos to the receiver
- 2x HS65 HB servos (rudder and elevator)
- 1x brushless motor 250-350W
- 1x brushless controller
- 1x LiPo battery 11.1V 2200mAh
- 1x cone of dia. 32 to 40mm
- 1x pair of propellers
- Transmitter/receiver set 6 channels or more
- Epoxy and Cyano glue
- Cutter
Contents of the kit

- Fuselage
- Carbon tail tube
- Wings
- Depth and daggerboard
- Accessories (rods, horns,...)
- English manual + plan
- Span in meters
- 2,70
- Type of aircraft kit
- Kit to build
- Material
- Fiber / Composite
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
16 other products in the same category:
UMX Radian AS3X and SAFE approx.73 cm BNF Basic E-Flite
E-Strega all fiber approx.2.90m yellow & black RCRCM
E-Typhoon PLUS all fiber approx.2.90m white & red RCRCM
Hotliner Robbe Amplitude PNP approx.1,80 m
TILIA 25 Plus Full Carbon (F5J-400) approx. 2.5m
Aeronaut RF4 Fournier (Styro/abachi wings and fiber fuselage) approx.2.81m
Pegasus (cross stack) approx.2.00m blue ARF TOPModeL CZ
Customers who bought this product also bought:
Ventilated aluminium cone Ø35mm (CNC machined) with Z-shaped blades for 3.2mm axis
Micro servo KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°)
Customers who bought this product also bought:
Hitec HS-65MG+ micro servo (12g, 2.2kg.cm, 0.10s/60°)
Hitec HS-65HB+ micro servo (11g, 2.2kg.cm, 0.11s/60°)
Ventilated aluminium cone Ø35mm (CNC machined) with Z-shaped blades for 3.2mm axis
FlashRC — Bande newsletter (Brevo à veni
Stay in the loop
RC news, guides and deals — once a week, no more.
By subscribing you accept our privacy policy. Unsubscribe anytime.
Your email addressSubscribe