Reduced motors - B40 11L Hacker + reduced MAXON 4,4:1 ceramic - FLASH RC
Reduced motors - B40 11L Hacker + reduced MAXON 4,4:1 ceramic - FLASH RC

B40 11L Hacker + reduced MAXON 4,4:1 ceramic

Last items in stock
€208.25
Tax included
High quality brushless motor HACKER associated with a MAXXOM 4,4:1 ceramic gearbox.suitable for narrow fuselages and can carry large propellers.example of use :- glider ~2,6kg- propeller : 16x10"- power supply LiPo 3S 3300mAh- recommended controller 55A- developed power : ~500W (conso 47A)

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

Characteristics

Max. power. 700W (15 sec.)
No-load current at 8,4V : 1,32A
Internal resistance : 0,0212 Ohm
kV : 2727 U/min-1 (or 620kV with the gearbox)
Weight : 205g
External diameter of the motor : 27,6 mm
External diameter of the gearbox : 22mm
Total length: 78,15 mm
No. of poles: 2
Recommended controller: 40A to 70A Brushless
Timing: 0° - 5°
Output shaft: 4 mm
Reduction ratio: 4,4:1

Engine weight
from 100g to 599g
Motor power in Watts
700
Revs/ minute Kv
2727
102-10605600
4250320205166
4250320205166
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

Customers who bought this product also bought:

Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST X10 HV 10mm wing servo (28g, 10.8kg.cm, 0.10s/60°)

KST servos
153-X10
€39.00
The KST X10 is a new servo in the X-series offering you a high torque HV product.The X10 is different from the DS225MG-HV by offering you new electronics to further improve its accuracy.With a torque of 10Kg.cm, equipped with precise metal gears, you will get a solid, durable servo with minimal play.The servo is delivered with two red plastic servo horns,...
Servos - Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°) - FLASH RC Servos - Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°)

KST servos
153-X10-MINI
€39.00
The KST X10 mini is a 5mm shorter version of the KST X10 version.this servo has the same dimensions as a KST DS135 MG but can be used with 2S Lipo.this servo will be perfect as a wing servo.delivered with rudder pedals and mounting screws.the servo is delivered with two red plastic rudder pedals, a single one (4 holes from 10 to 20mm), and a double one (4...
Folding blades - GM Georgi Mirov cone carbon 36mm Competition Line - FLASH RC
Last items in stock
Cones for folding propellers

GM Georgi Mirov carbon cone 36mm Competition Line

GEORGI MIROV
301-36MM-CL-SPINNER
€41.58
Competition Line version of the Georgi Mirov carbon cones: narrower hub allowing an absolute discretion of the blades once folded! Attention: only compatible with the Competition Line blades of Georgi MirovThe GM (Georgi Mirov) carbon cones for blades with 8 mm blade foot are very high quality cones.The cone assembly consists of a very well molded carbon...

Customers who bought this product also bought:

Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST X10 HV 10mm wing servo (28g, 10.8kg.cm, 0.10s/60°)

KST servos
153-X10
€39.00
The KST X10 is a new servo in the X-series offering you a high torque HV product.The X10 is different from the DS225MG-HV by offering you new electronics to further improve its accuracy.With a torque of 10Kg.cm, equipped with precise metal gears, you will get a solid, durable servo with minimal play.The servo is delivered with two red plastic servo horns,...
Folding blades - GM Georgi Mirov cone carbon 36mm Competition Line - FLASH RC
Last items in stock
Cones for folding propellers

GM Georgi Mirov carbon cone 36mm Competition Line

GEORGI MIROV
301-36MM-CL-SPINNER
€41.58
Competition Line version of the Georgi Mirov carbon cones: narrower hub allowing an absolute discretion of the blades once folded! Attention: only compatible with the Competition Line blades of Georgi MirovThe GM (Georgi Mirov) carbon cones for blades with 8 mm blade foot are very high quality cones.The cone assembly consists of a very well molded carbon...
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text