Servos - Digital metal servo HV75K 9mm Mks - FLASH RC
Servos - Digital metal servo HV75K 9mm Mks - FLASH RC

Digital metal servo HV75K 9mm Mks

€58.32
Tax included
New HV75K servo for F3K, HV version of the DS75K.very light (7,5gr) and thin (9mm), this servo is very powerful (3,3Kg/cm) and very high quality for the most demanding.Moreover the HV75K accepts a wide range of voltage, and has been designed to operate both in 1S LiPo and 2S! FLASH RC, authorized distributor MKS for France offers this micro servo very high quality which will be particularly well suited for hand-launched gliders type F3K

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

Technical characteristics

  • Dimensions: 23 X 9 X 17.9 mm
  • Voltage range : 3.7 ~ 8.2 V DC Volts (supports 1S and 2S LiPo)
  • Torque : 1.4Kg.cm (3.7V), 2.3Kg.cm (6.0V), 2.8Kg.cm (7.4V)
  • Speed : 0.21s/60° (3.7V), 0.13s/60° (6.0V), 0.10s/60° (7.4V)
  • Pulse width/maximum operating frequency: 1520μs / 333hz
  • Dead zone : 0.001ms (Default)
  • Double bearing
  • Coreless motor
  • 7075 Chrome-Titanium gears
  • Aluminum housing

Thickness in mm (Servos)
9
Torque in kg.cm (servos)
2.8
Speed sec / 60° (servos)
0.1
Pinions (servos)
Metal
Bearing (servos)
yes
Technology (sevos)
Digital
HV (servos)
yes
Weight in g (servos)
7.5
128-S0022007
4710150350523
4710150350523
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

Servos - Hitec HS-5495BH standard servo (53g, 7.5kg.cm, 0.15s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec HS-5495BH standard servo (53g, 7.5kg.cm, 0.15s/60°)

HITEC
064-114495
€29.08
By proposing this HS-5495BH servo, Hitec puts on the market an economical digital servo with karbonite gears capable of being powered by LiPo 2S 7,4V. It can be used either in aeromodelling or in all styles of 1/10th and 1/8th cars. The HS-5495BH servo will perfectly meet your expectations while offering an attractive price.Features- Torque: 7.5kg.cm-...
Servos - Savox SG-0211MG digital wing servo (29g, 8kg.cm, 0.13s/60°) - FLASH RC Servos - Savox SG-0211MG digital wing servo (29g, 8kg.cm, 0.13s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Savox SG-0211MG digital wing servo (29g, 8kg.cm, 0.13s/60°)

Savöx
191-SG-0211MG
€44.16
SAVÖX SG-0211MG digital flat servo, metal gears, 2 bearings, only 10mm thick for a torque of 8kg/cm at 6.0V!Sold with the three-point servo mount for clean mounting in the wings of a gliderFeatures:Dimensions: 36 x 30 x 10 mmMark: 29 grVoltage: 4.8 to 6VSpeed: 0.16 sec (4.8V) to 0.13 sec (6.0V) at 60°CTorque: 6kg/cm (4.8V) 8kg/cm (6.0V)Rudder head: 21 teeth
Servos - Servo micro KST A08 V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST A08 V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A08 V6.0 HV micro servo (7g, 3.2kg.cm, 0.09s/60°)

KST servos
153-A08-V6
€43.33
The main advantage of the A08 over the X08 is a slightly smaller footprint and a fully enclosed motor assembly. The gear train is also a brand new design and tighter than the X08 series and has a little extra travel. The weight between the X08 v5, X08 v6 and A08 v6 is about the same.The Micro servo A08 V6.0 KST is a powerful small digital servo with an...
Servos - Servo micro KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Micro servo KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°)

KST servos
153-X08-PLUS
€43.33
The Micro servo X08 PLUS KST is a powerfull small digital servo with aluminium housing, all with double bearing ! The PLUS is the same housing as the V5.0, but with a more powerfull motor, developing up to 5,3kg/cm in 2S lipo ! ni N/ni H version = Horizontally placed fixations (classic).it will be perfect for F3K gliders.delivered with rudder pedals and...
Servos - Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°)

HITEC
064-1-00707
€58.25
Wide-Voltage servo of the D-series without potentiometer with a torque of 9.1kgcm*New 15mm servo from HiTEC, extremely light and at the same time very powerful! Excellent performance:Magnetic Encoder for non-contact position recognition, no wear and tear (without potentiometer)Optimal resolution, therefore absolute positioning accuracy.The MD250MW can be...

Customers who bought this product also bought:

Customers who bought this product also bought:

FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text