Workshop Tools - Proxxon SP/E - Sander and polisher from 3000 to 9000 rpm regulating from 8 to 24 m/sec - FLASH RC
Workshop Tools - Proxxon SP/E - Sander and polisher from 3000 to 9000 rpm regulating from 8 to 24 m/sec - FLASH RC

Proxxon SP/E - Sander and polisher from 3000 to 9000 rpm regulating from 8 to 24 m/sec

Last items in stock
€79.08
Tax included
Proxxon SP/E sander/polisherThe narrow housing next to the grinding wheels also allows for working on long workpiece surfaces.Sturdy plastic housing with dust extraction outlet. Adjustable workpiece rests and protective cover. The spindle stopper allows a quick change of the sanding accessories. Supplied with a 50 x 13 mm corundum wheel (hardness N) for grinding and sharpening and a silicon carbide wheel (softer composition) for very hard materials. Right-hand shaft with threaded end for attaching the polishing attachments (supplied).Technical data:230 V. 3.000 - 9.000 rpm. Grinding wheels 50 x 13 x 12,7 mm. Sanding speed 8 to 24 m/sec. Weight approx. 1.200 g. Dimensions approx. 250 x 130 x 100 mm. Equipped with dust collector and adapter for clean and dust-free working.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 
273-28030
4006274280304
4006274280304
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

Workshop Tools - Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film - FLASH RC
Last items in stock
Workshop tools

Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film

PROXXON
273-27080
€104.08
Proxxon THERMOCUT 230/E Hot Wire CutterFor model making by architects, designers, decorators, artists (also for practical work in applied art) and for prototype construction. Stable frame and 390 x 280 mm surface made of aluminum composite material. Structured surface, allowing an even gliding of the part to be cut. The screen-printed frame and the design...
Workshop Tools - Proxxon OZI/E - 100W delta oscillating angle sander in box with 4 sheets of abrasive - FLASH RC
Last items in stock
Workshop tools

Proxxon OZI/E - 100W delta oscillating angle sander in case with 4 sheets of sanding...

PROXXON
273-28520
€104.08
Proxxon OZI/E angle grinderSmall, but unbeatable in its size! For sanding hard-to-reach surfaces and tight spaces: corners, edges and hollows. The oscillating operation is very quiet and thanks to the accessories offered, it is also suitable for cutting, sinking and filing. Electronically adjustable oscillation frequency for material-specific work....
Workshop tools - Proxxon MICROMOT 60/E - 12V regul 5000/20000 rpm drill with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon MICROMOT 60/E - 12V regul 5000/20000 rpm drill with 6 collets from 1 to 3,2 mm

PROXXON
273-28510
€27.49
The 35 mm diameter makes them particularly easy to handle, but they also have a low weight (approx. 230 g), a pleasant noise level and smooth operation thanks to the balanced motor and the ground ball bearing shaft. The use of MICROMOT collets made of high quality steel (see description below) allows extremely concentric clamping of even the smallest tool...
Workshop tools - Proxxon DH 40 - Planer max HT 40 mm width 80 mm max pass of 0,8 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon DH 40 - Planer max HT 40 mm max width 80 mm max pass of 0,8 mm

PROXXON
273-27040
€524.92
Proxxon DH 40 PlanerSupporting cast aluminum construction with spindles and bearings mounted on axles, the prerequisite for accurate, vibration-free planing of hard and soft wood. The planing table (made of die-cast aluminum, milled flat) is mounted on 3 supports and is operated by a hand lever (with reset vernier), which allows an adjustment of 1/10 mm....
Workshop tools - Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 clamps from 1 to 3.2 mm

PROXXON
273-28620
€23.67
Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 collets from 1 to 3.2 mmProxxon Flexible MICROMOT 110/PFlexible shaft made of polished steel, with double ball bearing and collet housing made of MICROMOT steel. The shaft end on the machine side is ball-bearing mounted. Extremely flexible core (no overheating even with very tight corners)....
Workshop Tools - Proxxon BS/E - Belt Sander 100W regul 300 to 700 rpm in 4 belt cabinet - FLASH RC
Last items in stock
Workshop tools

Proxxon BS/E - Belt sander 100W regul 300 to 700 rpm in a case with 4 belts

PROXXON
273-28536
€108.25
BS/EP belt sander for sanding small openings, finishing shapes and surfaces, polishing grooves, filing burrs and flattening small surfaces.Cast aluminum drive head for high stability and precise adjustment due to ball bearings. Special balanced DC motor, powerful, quiet and durable. Infinitely variable speed control (full-wave electronics).60° tilting of...

Customers who bought this product also bought:

Customers who bought this product also bought:

FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text