Program Card KAVAN ESC

The KAVAN R flight ESC programming card (also compatible with RAY G2 ESCs) is used for quick and easy ESC programming - at home "on the desk" as well as at the airfield. The ESC is connected via a servo cable, the plug is located on top of the board. Power to the board is provided by the KAVAN R ESC's BEC stabilizer.

WARNING: The KAVAN R LED programming card cannot be used to program first generation RAY ESCs and the first generation RAY programming card cannot be used to program KAVAN R ESCs.

KAVAN R ESCs can be programmed in the model with the propeller mounted - for safety reasons, however, we recommend that the propeller be removed during programming - this will prevent a possible accident in the event of operator error or omission.

The four buttons on the bottom of the board are used for programming. They are used to select the programming functions to be set and to set their value indicated by the corresponding LED. The "OK" button confirms the change and sends it to the CES, the "Reset" button is used to erase all settings and return all values to the factory default settings. The status of the communication with the ESC is indicated by the "Connecting" LED.

Programming: Disconnect the ESC servo cable from the receiver and plug it into the socket in the upper right corner of the board marked "BEC". Connect the drive battery to the ESC; the LEDs on the board will light up to show you the current setpoints for each function - and you're ready to set them!

The list of functions and adjustable values is shown on the label on the board, a detailed description of the functions is given in the manuals supplied with the KAVAN R ESCs.

Supply voltage [V]: 4.8 - 6; Length [mm]: 92; Width [mm]: 52; Height [mm]: 6; Weight [g]: 26