Servos - Hitec MD89MW mini digital servo with magnetic encoder (25g, 8.5kg.cm, 0.11s/60°) - FLASH RC
Servos - Hitec MD89MW mini digital servo with magnetic encoder (25g, 8.5kg.cm, 0.11s/60°) - FLASH RC

Hitec MD89MW mini digital servo with magnetic encoder (25g, 8.5kg.cm, 0.11s/60°)

€79.92
Tax included
Hitec MD-89MG HV digital servo, with magnetic encoderTake the popular Hitec HS-85. Add a set of five metal gears, Hitec's High Response technology, 32-bit D-Series processor board, two bearings, and the ability to operate from 4.8V to 7.4V...and you have the new gold standard in the mini performance servo family! The HITEC D-Series HS D-89MW ultra-fast servos offer the highest resolution on the market today. The best response and programming capabilities are achieved through the 32-bit MCU and 12-bit ADC technology.The 'D' series includes HITEC servos that operate on both conventional (4.8/6V) and HV (8.4V) voltage. The MD-89MW Digital servo is fully programmable and offers good durability thanks to its robust full steel gears and two ball bearings on the output shaft, which is especially suitable when low backlash and high positioning accuracy are important.The long life and uniquely designed transmission make it one of the most reliable and efficient servos on the market.

custom html
you can configure this block in iqithtmlbanners module. It is hooked in displayRightColumnProduct hook.

To disable entire area go to iqitthemeeditor module > Content/Pages > Product page and set hidden for Right sidebar option
 

Features :

  • Width: 13 mm
  • Height: 30 mm
  • Length: 29 mm
  • Weight: 25 gr
  • Servo type: mini
  • Special features: large digital voltage
  • gears: metal (x5)
  • Operating voltage in V: 4.8-7.4 V
  • Operating time s / 60 ° at 4.8 volts: 0.17
  • Operating time s / 60 ° at 7.4 volts: 0.11
  • Torque in kgcm at 4.8 volts: 5.3
  • Torque in kgcm at 7.4 volts: 8.5
  • Gear: 25T
  • Ball bearing: yes, double
  • Sealed: no
  • Magnetic encoder

Features

32-bit programmable digital PWM circuit
CAN bus (2.0A or 2.0B), UAVCAN, RS-485, PWM and TTL protocol capability
Magnetic encoder position sensor
Wide operating voltage (4.8 ~ 7.4 V)
Robust, long-life motors
IP65-rated enclosures
25-tooth output shaft
Customization and modification options available
Custom connector options available

Parts and Accessories

Replacement gear set
Replacement case set
Applicable horns and mounting hardware

Programmable features

Endpoint adjustments
Direction
Fail Safe
Deadband
Speed (slower)
Soft start rate
Overload protection
Data backup / loading


Thickness in mm (Servos)
13
Torque in kg.cm (servos)
8.5
Speed sec / 60° (servos)
0.11
Pinions (servos)
Metal
Bearing (servos)
yes
Technology (sevos)
Digital
HV (servos)
yes
Weight in g (servos)
25
064-1-01237
4059818012374
4059818012374
No reviews
Comments (0)
No customer reviews for the moment.

16 other products in the same category:

Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Micro servo KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°)

KST servos
153-HS-08A
€37.42
KST delivers again with these KST HS08 series competition servos for F5J glider pilots and glider enthusiasts who demand the best! The all-new HS08s are almost as compact as the popular KST X08 series and offer power and performance levels close to those of the X10 Mini servos in an 8mm thick housing.The slim 8mm thick housing is made from 7075 aluminum...
Servos - Servo micro KST A08H V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST A08H V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A08H V6.0 HV Micro Servo (7g, 3.2kg.cm, 0.09s/60°)

KST servos
153-A08H-V6
€43.33
The main advantage of the A08 over the X08 is a slightly smaller footprint and a fully enclosed motor assembly. The gear train is also a brand new design and tighter than the X08 series and has a little extra travel. The weight between the X08 v5, X08 v6 and A08 v6 is about the same.The Micro servo A08 V6.0 KST is a powerful small digital servo with an...

Customers who bought this product also bought:

Servos - Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°)

HITEC
064-1-00707
€58.25
Wide-Voltage servo of the D-series without potentiometer with a torque of 9.1kgcm*New 15mm servo from HiTEC, extremely light and at the same time very powerful! Excellent performance:Magnetic Encoder for non-contact position recognition, no wear and tear (without potentiometer)Optimal resolution, therefore absolute positioning accuracy.The MD250MW can be...
Servos - Hitec D-645MW HV standard digital servo (60g, 12.9kg.cm, 0.17s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec D-645MW HV standard digital servo (60g, 12.9kg.cm, 0.17s/60°)

HITEC
064-116645
€41.58
Hitec D-645MW HV digital servoThe ultra-fast HS D-645MW HITEC D-Series servos offer the highest resolution on the market today. The best response and programming capabilities are achieved through the 32-bit MCU and 12-bit ADC technology.The 'D' series includes HITEC servos that operate on both conventional (4.8/6V) and HV (8.4V) voltage. The HS-645MW...
Servos - Hitec D89MW mini digital servo (25g, 8.5kg.cm, 0.11s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec D89MW mini digital servo (25g, 8.5kg.cm, 0.11s/60°)

HITEC
064-1-00077
€49.08
Hitec D-89MG HV digital servoTake the popular Hitec HS-85. Add a set of five metal gears, Hitec's High Response technology, 32-bit D-Series processor board, two bearings, and the ability to operate from 4.8V to 7.4V...and you have the new gold standard in mini performance servos! The HITEC D-Series D-89MW ultra-fast servos offer the highest resolution on...

Customers who bought this product also bought:

Servos - Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec MD-250MW HV mini digital servo (31g, 9.1kg.cm, 0.13s/60°)

HITEC
064-1-00707
€58.25
Wide-Voltage servo of the D-series without potentiometer with a torque of 9.1kgcm*New 15mm servo from HiTEC, extremely light and at the same time very powerful! Excellent performance:Magnetic Encoder for non-contact position recognition, no wear and tear (without potentiometer)Optimal resolution, therefore absolute positioning accuracy.The MD250MW can be...
Servos - Hitec D-645MW HV standard digital servo (60g, 12.9kg.cm, 0.17s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec D-645MW HV standard digital servo (60g, 12.9kg.cm, 0.17s/60°)

HITEC
064-116645
€41.58
Hitec D-645MW HV digital servoThe ultra-fast HS D-645MW HITEC D-Series servos offer the highest resolution on the market today. The best response and programming capabilities are achieved through the 32-bit MCU and 12-bit ADC technology.The 'D' series includes HITEC servos that operate on both conventional (4.8/6V) and HV (8.4V) voltage. The HS-645MW...
Servos - Hitec D89MW mini digital servo (25g, 8.5kg.cm, 0.11s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Hitec D89MW mini digital servo (25g, 8.5kg.cm, 0.11s/60°)

HITEC
064-1-00077
€49.08
Hitec D-89MG HV digital servoTake the popular Hitec HS-85. Add a set of five metal gears, Hitec's High Response technology, 32-bit D-Series processor board, two bearings, and the ability to operate from 4.8V to 7.4V...and you have the new gold standard in mini performance servos! The HITEC D-Series D-89MW ultra-fast servos offer the highest resolution on...
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text