Tools

Tools (pliers, scales, wrenches, soldering irons...) for RC modelling - Flash RC
Soldering, iron, tin - Mini soldering iron TS100 intelligent control (12-24V/17-65W) - FLASH RC Soldering, iron, tin - Mini soldering iron TS100 intelligent control (12-24V/17-65W) - FLASH RC 2
Last items in stock
Welding, iron, tin

Mini soldering iron TS100 intelligent control (12-24V/17-65W)

SEQURE
096-BEETOOL10
€82.42
The TS100 iron uses a stainless steel shell embedded in polycarbonate. It is equipped with a safety circuit and an antistatic structure, integrated with a DC5525 connector accepting 12 to 24 V. It has two temperature sensors and accelerated sensors with STM32 chip. Thanks to these features, the temperature is precisely controlled, remains stable, and can...
Workshop Tools - Proxxon BBS/S - Compact belt sander 150W sanding surface 60x 40 mm in cabinet - FLASH RC
Last items in stock
Workshop tools

Proxxon BBS/S - Compact belt sander 150W sanding surface 60x 40 mm in case

PROXXON
273-28526
€133.25
BBS/SM special DC motor, powerful, quiet and durable, the sanding belt is mounted on the left side of the tool, which allows to work on surfaces up to the corners. Precise adjustment by means of rollers prevents the belt from escaping from the side. Easy belt exchange without additional tools thanks to the clamping system. Housing made of glass fiber...
Workshop Tools - Proxxon OZI/E - 100W delta oscillating angle sander in box with 4 sheets of abrasive - FLASH RC
Last items in stock
Workshop tools

Proxxon OZI/E - 100W delta oscillating angle sander in case with 4 sheets of sanding...

PROXXON
273-28520
€104.08
Proxxon OZI/E angle grinderSmall, but unbeatable in its size! For sanding hard-to-reach surfaces and tight spaces: corners, edges and hollows. The oscillating operation is very quiet and thanks to the accessories offered, it is also suitable for cutting, sinking and filing. Electronically adjustable oscillation frequency for material-specific work....
Workshop tools - Proxxon TSG 250/E - Disc sander Ø 250 mm max sanding HT 135 mm + table and regulation - FLASH RC
Last items in stock
Workshop tools

Proxxon TSG 250/E - Disc sander Ø 250 mm max sanding HT 135 mm + table and regulation

PROXXON
273-28060
€240.83
Proxxon TSG 250/E Disc SanderFor sanding longitudinal edges, end edges, rounding, mitering and right-angled flat surfaces.For working on softwood, hardwood, non-ferrous metal, steel, plastic (also Plexiglas and fiberglass), cork and rubber. Stable construction:Main housing made of ribbed cast aluminum (no tube or pressed sheet metal structure). Flat...
Workshop Tools - Proxxon KS 230 - Bench circular saw for softwood up to 8 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon KS 230 - Bench circular saw for cutting softwood up to 8 mm

PROXXON
273-27006
€124.92
KS 230 Proxxon bench circular sawThe included "super-cut" blade (Ø 58 mm) cuts softwood up to 8 mm thick.Quiet and durable AC motor. Toothed belt drive for precise saw blade speed with double the torque. Cutting performance in wood 8 mm, plastic (also PERTINAX plates) approx. 3 mm, non-ferrous metals approx. 1,5 mm. Even CCA plates can be separated by...
Workshop Tools - Proxxon MICROMOT 60/EF - 12V Quick Coupling Drill-Mill 0,3 to 3,2 mm - FLASH RC
Out-of-Stock
Workshop tools

Proxxon MICROMOT 60/EF - 12V drill-mill with quick-release chuck from 0.3 to 3.2 mm

PROXXON
273-28512
€30.75
The 35 mm diameter makes them particularly easy to handle, but they also have a low weight (approx. 230 g), a pleasant noise level and smooth operation thanks to the balanced motor and the ground ball bearing shaft. The use of MICROMOT collets made of high quality steel (see description below) allows extremely concentric clamping of even the smallest tool...
View
Workshop Tools - Proxxon SP/E - Sander and polisher from 3000 to 9000 rpm regulating from 8 to 24 m/sec - FLASH RC
Last items in stock
Workshop tools

Proxxon SP/E - Sander and polisher from 3000 to 9000 rpm regulating from 8 to 24 m/sec

PROXXON
273-28030
€79.08
Proxxon SP/E sander/polisherThe narrow housing next to the grinding wheels also allows for working on long workpiece surfaces.Sturdy plastic housing with dust extraction outlet. Adjustable workpiece rests and protective cover. The spindle stopper allows a quick change of the sanding accessories. Supplied with a 50 x 13 mm corundum wheel (hardness N) for...
Workshop tools - Proxxon MICROMOT 60/E - 12V regul 5000/20000 rpm drill with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon MICROMOT 60/E - 12V regul 5000/20000 rpm drill with 6 collets from 1 to 3,2 mm

PROXXON
273-28510
€27.49
The 35 mm diameter makes them particularly easy to handle, but they also have a low weight (approx. 230 g), a pleasant noise level and smooth operation thanks to the balanced motor and the ground ball bearing shaft. The use of MICROMOT collets made of high quality steel (see description below) allows extremely concentric clamping of even the smallest tool...
Workshop Tools - Proxxon MBS 240/E - Micro band saw HT max cut 85 mm table 220 x 200 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon MBS 240/E - Micro band saw HT max cutting height 85 mm table 220 x 200 mm

PROXXON
273-27172
€275.83
Proxxon MICRO-BAND SAW MBS 240/ESolid housing made of ribbed cast aluminum (no tubular steel or pressed sheet metal construction). Stable table with flat milled work surface, miter slot. (Tiltable table top at 45° for mitre cuts). Band guide mounted on 3 bearings and adjustable height. Adjustable for different blade widths. Quiet 220 volt motor drive with...
Workshop Tools - Proxxon LWB/E - 100W long neck angle grinder with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon LWB/E - 100W long neck angle grinder with 6 collets from 1 to 3.2 mm

PROXXON
273-28492
€99.92
Proxxon LWB/E Long Neck Angle DrillWith ball bearing mounted drive in a cast aluminum gear head.Also suitable for right angle cutting. Powerful, quiet and durable balanced special DC motor. Infinitely variable speed control (full wave electronics). Central housing made of glass fiber reinforced POLYAMIDE. Safe storage in an attractive, sturdy plastic...
Workshop tools - Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 clamps from 1 to 3.2 mm

PROXXON
273-28620
€23.67
Proxxon Flexible 110P with 3 ball bearings 35000 rpm with 6 collets from 1 to 3.2 mmProxxon Flexible MICROMOT 110/PFlexible shaft made of polished steel, with double ball bearing and collet housing made of MICROMOT steel. The shaft end on the machine side is ball-bearing mounted. Extremely flexible core (no overheating even with very tight corners)....
Workshop Tools - Proxxon IBS/E - Industrial Drilling and Routing Machine 100W, 6 collets from 1 to 3.2 mm, 34 tool set - FLASH R
Last items in stock
Workshop tools

Proxxon IBS/E - Industrial drill/mill 100W, 6 collets from 1 to 3.2 mm, 34 tool set

PROXXON
273-28481
€83.25
Proxxon IBS/E Industrial Grinder/DrillFor drilling, milling, grinding, cleaning, cutting, engraving and signing. For precision mechanics, model making, jewelry, optics, applied arts and electronics. High concentricity accuracy (max. 3/100 mm). No chattering, no tool runout.a bestseller with special balanced DC motor. Stepless electronic speed control...
Workshop tools - Proxxon UHZ - Universal holder with clamp, neck 20 mm for all MICROMOT - FLASH RC machines
Last items in stock
Workshop tools

Proxxon UHZ - Universal holder with clamp, 20 mm neck for all MICROMOT machines

PROXXON
273-28610
€20.75
Proxxon UHZ universal holder with ball joint. 20 mm collar for MICROMOT devices such as FBS 240/E, FBS 12/EF, IBS/E, LBS/E, MICROMOT 50, 50/E and 50/EF. Zinc die-cast. With olive for quick and safe attachment to workbenches and table tops up to 60 mm thick. It can also be fixed to any work surface with 2 standard screws. Note: The industrial grinder IBS/E...
Workshop tools - Proxxon FBS 240/E - Drill 100W max 20000 rpm chuck 0,3 to 3,2 mm set 40 tools - FLASH RC
Last items in stock
Workshop tools

Proxxon FBS 240/E - Drill 100W max 20000 rpm chuck 0,3 to 3,2 mm set 40 tools

PROXXON
273-28472
€63.25
Proxxon FBS 240/E - 100W precision drill grinder, max. 20,000 rpm chuck 0.3 to 3.2 mm case 40 tools Power with silence! For drilling, milling, grinding, sanding, brushing, cutting and engraving. The maximum speed of 22,000 rpm can be gradually reduced to 5,000 rpm by means of a full-wave electronic system. Almost constant torque even at low rpm. This is...
Workshop Tools - Proxxon KT70 - Micro coordinate table for MB 140/S and TBM 220 with flanges and fixtures - FLASH RC
Last items in stock
Workshop tools

Proxxon KT70 - Micro coordinate table for MB 140/S and TBM 220 with flanges and fixtures

PROXXON
273-27100
€74.92
MICRO coordinate table KT 70 ProxxonHigh tensile aluminum (densified surface) with adjustable dovetail guides.3 longitudinal T-slots (MICROMOT standard 12 x 6 x 5 mm). Sliding rule for easy transverse positioning of the carriage. Rollers with vernier repositionable on zero: 1 turn = 1 mm, 1 graduation = 0,05 mm of advance. Supplied with clamps and...
Workshop Tools - Proxxon FBS 12/E - Drill and Grinder 12V 100W 2A max 15000 rpm chuck 0,5 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon FBS 12/E - Drill and grinder 12V 100W 2A max 15000 rpm chuck 0,5 to 3,2 mm

PROXXON
273-28462
€39.92
Proxxon FBS 12/E - Drill and Grinder 12V 100W 2A max 15000 rpm chuck 0.5 to 3.2 mmFor precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiseling and cutting. with chuck (0.3 to 3.2 mm). Precision ground steel spindle, ball bearing mounted. The spindle is locked at the push of a button for tool change. Bored shaft head for...
Workshop Tools - Proxxon MICROMOT 230/E - 230V regul 6000/22000 rpm drill with 6 collets from 1 to 3,2 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon MICROMOT 230/E - 230V regul 6000/22000 rpm drill with 6 collets from 1 to 3,2 mm

PROXXON
273-28440
€70.75
For drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing (glass-fiber reinforced POLYAMIDE) with soft components in the grip area allows the unit to be handled with two fingers (pen grip).Special balanced DC motor. Quiet and extremely durable. The maximum speed of 22.000/min can be continuously reduced to...
Workshop Tools - Proxxon DS 230/E - Chop saw, softwood cut 40 mm, hardwood cut 10mm, regul 150/2500 rpm - FLASH RC
Last items in stock
Workshop tools

Proxxon DS 230/E - Chop saw, softwood cut 40 mm, hardwood cut 10mm, regul 150/2500 rpm

PROXXON
273-27088
€149.92
Proxxon DS 230/E cutting saw with electronic speed control. For cutting softwood up to 40 mm, hardwood up to 10 mm, plastic (including sheet metal) up to approx. 4 mm and non-ferrous metal up to 2 mm. Die-cast aluminum sawing bar with cross ribs (300 mm range). Blade guide with integrated blower. Height adjustable head (3 positions) with 2 important...
Workshop tools - Proxxon HKP 220 - Glue gun 200° with 3 tips and 4 glue sticks Ø 7 mm Lg 100 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon HKP 220 - Glue gun 200° with 3 tips and 4 glue sticks Ø 7 mm Lg 100 mm

PROXXON
273-28192
€14.08
MICROMOT HKP 220 Proxxon glue gunFast and reliable gluing of metal, wood, plastic (also Plexiglas), glass, ceramics, earthenware, cardboard, leather, foam and textile. Depending on the material and the quantity, the glue adheres after approx. 30 sec. The sticks of Ø 7 mm are particularly suitable for delicate work (model making, toy repair, dried flowers,...
Workshop Tools - Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film - FLASH RC
Last items in stock
Workshop tools

Proxxon THERMOCUT - Hot wire cutter for cutting polystyrene and thermoplastic film

PROXXON
273-27080
€104.08
Proxxon THERMOCUT 230/E Hot Wire CutterFor model making by architects, designers, decorators, artists (also for practical work in applied art) and for prototype construction. Stable frame and 390 x 280 mm surface made of aluminum composite material. Structured surface, allowing an even gliding of the part to be cut. The screen-printed frame and the design...
Workshop Tools - Proxxon PS 13 - Non rotating linear sander 12V 1A delivered with 8 pads + 3 sanding sheets - FLASH RC
Last items in stock
Workshop tools

Proxxon PS 13 - Non-rotating linear sander 12V 1A delivered with 8 pads + 3 sanding sheets

PROXXON
273-28594
€20.75
PS 13 Proxxon linear non-rotating sander.ideal for working on surfaces in cavities, grooves, compartments and nooks and crannies.linear (non-rotating) sanding. Durable special DC motor. Housing made of glass-fiber reinforced POLYAMIDE. The sander is supplied with 4 straight and 4 angled sanding pads of different shapes, with 3 self-adhesive sanding sheets...
Workshop Tools - Proxxon BS/E - Belt Sander 100W regul 300 to 700 rpm in 4 belt cabinet - FLASH RC
Last items in stock
Workshop tools

Proxxon BS/E - Belt sander 100W regul 300 to 700 rpm in a case with 4 belts

PROXXON
273-28536
€108.25
BS/EP belt sander for sanding small openings, finishing shapes and surfaces, polishing grooves, filing burrs and flattening small surfaces.Cast aluminum drive head for high stability and precise adjustment due to ball bearings. Special balanced DC motor, powerful, quiet and durable. Infinitely variable speed control (full-wave electronics).60° tilting of...
Workshop Tools - Proxxon STS 12/E - Jigsaw 12V 100W 2A with regulation delivered with 2 blades - FLASH RC
Last items in stock
Workshop tools

Proxxon STS 12/E - Jigsaw 12V 100W 2A with regulation delivered with 2 blades

PROXXON
273-28534
€39.92
Jig saw STS 12/E ProxxonIdeal for corrugated cuts in wood (max. 10 mm), sheet metal (max. 3 mm) and non-ferrous metal (max. 2.5 mm) with a powerful special DC motor. Progressive speed adjustment with feedback effect. Housing made of glass fiber reinforced POLYAMIDE. Supplied with 2 saw blades, coarse and fine. For the power supply of the STS 12/E we...
Workshop Tools - Proxxon STS/E - 100W jig saw with control in cabinet with 4 blades - FLASH RC
Last items in stock
Workshop tools

Proxxon STS/E - 100W jig saw with control in cabinet with 4 blades

PROXXON
273-28530
€95.75
Proxxon STS/E Super Jig SawExact cutting and precision: Heavy-duty zinc die-cast drive head for exact cutting and adjustment. Fiberglass-reinforced POLYAMIDE center housing. Special balanced DC motor, powerful, quiet and durable. Progressive adjustment (full wave electronic). Cutting table with stop (tiltable up to 45°). Particularly suitable for curved...
Workshop tools - Proxxon DH 40 - Planer max HT 40 mm width 80 mm max pass of 0,8 mm - FLASH RC
Last items in stock
Workshop tools

Proxxon DH 40 - Planer max HT 40 mm max width 80 mm max pass of 0,8 mm

PROXXON
273-27040
€524.92
Proxxon DH 40 PlanerSupporting cast aluminum construction with spindles and bearings mounted on axles, the prerequisite for accurate, vibration-free planing of hard and soft wood. The planing table (made of die-cast aluminum, milled flat) is mounted on 3 supports and is operated by a hand lever (with reset vernier), which allows an adjustment of 1/10 mm....
Home
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text