List of products by brand KST servos

Servo wing KST A12-T HV 12mm (32g, 13.8kg.cm, 0.08s/60°) - FLASH RC Servo wing KST A12-T HV 12mm (32g, 13.8kg.cm, 0.08s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A12-T HV 12mm wing servo (32g, 13.8kg.cm, 0.08s/60°)

KST servos
153-A12-T
€66.66
The KST A12-T servo uses a magnetic (hall effect) sensor to provide position feedback, replacing the troublesome sliding contact potentiometer used in most servos. This greatly improves the reliability of the servo, while providing better accuracy and resolution. The A12-T also features an ultra-efficient coreless motor, steel gear train, aluminum...
Servos - Servo micro KST A08N V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST A08N V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A08N V6.0 HV micro servo (7g, 3.2kg.cm, 0.09s/60°)

KST servos
153-A08N-V6
€43.33
The main advantage of the A08 over the X08 is a slightly smaller footprint and a fully enclosed motor assembly. The gear train is also a brand new design and tighter than the X08 series and has a little extra travel. The weight between the X08 v5, X08 v6 and A08 v6 is about the same.The Micro servo A08 V6.0 KST is a powerful small digital servo with an...
Servos - Servo micro KST A08H V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST A08H V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A08H V6.0 HV Micro Servo (7g, 3.2kg.cm, 0.09s/60°)

KST servos
153-A08H-V6
€43.33
The main advantage of the A08 over the X08 is a slightly smaller footprint and a fully enclosed motor assembly. The gear train is also a brand new design and tighter than the X08 series and has a little extra travel. The weight between the X08 v5, X08 v6 and A08 v6 is about the same.The Micro servo A08 V6.0 KST is a powerful small digital servo with an...
Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC Servos - Servo micro KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Micro servo KST HS08A MG HV (8g, 5.2kg.cm, 0.11s/60°)

KST servos
153-HS-08A
€37.42
KST delivers again with these KST HS08 series competition servos for F5J glider pilots and glider enthusiasts who demand the best! The all-new HS08s are almost as compact as the popular KST X08 series and offer power and performance levels close to those of the X10 Mini servos in an 8mm thick housing.The slim 8mm thick housing is made from 7075 aluminum...
Servos - Servo micro KST HS08B MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC Servos - Servo micro KST HS08B MG HV (8g, 5.2kg.cm, 0.11s/60°) - FLASH RC 2
Out-of-Stock
RC Servos: Precision & Reliability for Modeling

KST HS08B MG HV Micro Servo (8g, 5.2kg.cm, 0.11s/60°)

KST servos
153-HS-08B
€46.67
KST delivers again with these KST HS08 series competition servos for F5J glider pilots and glider enthusiasts who demand the best! The all-new HS08s are almost as compact as the popular KST X08 series and offer power and performance levels close to those of the X10 Mini servos in an 8mm thick housing.The slim 8mm thick housing is made from 7075 aluminum...
View
Servos - Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°) - FLASH RC Servos - Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Servo wing KST X10 Mini HV 10mm (23g 7.5kg.cm, 0.09s/60°)

KST servos
153-X10-MINI
€39.00
The KST X10 mini is a 5mm shorter version of the KST X10 version.this servo has the same dimensions as a KST DS135 MG but can be used with 2S Lipo.this servo will be perfect as a wing servo.delivered with rudder pedals and mounting screws.the servo is delivered with two red plastic rudder pedals, a single one (4 holes from 10 to 20mm), and a double one (4...
Servos - Servo mini KST MS325 HV 12mm (21g, 5.2Kg.cm, 0.07s/60°) - FLASH RC Servos - Servo mini KST MS325 HV 12mm (21g, 5.2Kg.cm, 0.07s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Mini servo KST MS325 HV 12mm (21g, 5.2Kg.cm, 0.07s/60°)

KST servos
153-MS325
€39.13
The new KST MS325 is a state-of-the-art servo. A high reliability servo that utilizes non-contact/magnetic position sensing to eliminate the potentiometer that is the weakest element of conventional servos, this advanced technology from KST has the potential to revolutionize the RC servo industry. This increased reliability will make these servos the...
Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC Servos - Servo wing KST X10 HV 10mm (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST X10 HV 10mm wing servo (28g, 10.8kg.cm, 0.10s/60°)

KST servos
153-X10
€39.00
The KST X10 is a new servo in the X-series offering you a high torque HV product.The X10 is different from the DS225MG-HV by offering you new electronics to further improve its accuracy.With a torque of 10Kg.cm, equipped with precise metal gears, you will get a solid, durable servo with minimal play.The servo is delivered with two red plastic servo horns,...
Servos - Servo mini KST MS320 HV 12mm (21g, 6.2kg.cm, 0.075s/60°) - FLASH RC Servos - Servo mini KST MS320 HV 12mm (21g, 6.2kg.cm, 0.075s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Mini servo KST MS320 HV 12mm (21g, 6.2kg.cm, 0.075s/60°)

KST servos
153-MS320
€39.13
The new KST MS320 is a state-of-the-art servo. A high reliability servo that utilizes non-contact/magnetic position sensing to eliminate the potentiometer that is the weakest element of conventional servos.This advanced technology from KST has the potential to revolutionize the RC servo industry. This increased reliability will make these servos the...
Servos - 4x KST X10 HV mini 10mm servos (23g, 7.5kg.cm, 0.09s/60°) - FLASH RC
  • Pack
RC Servos: Precision & Reliability for Modeling

4x KST X10 HV mini 10mm servos (23g, 7.5kg.cm, 0.09s/60°)

KST servos
P153-X10-MINIx4
€151.33
Set of 4x X10 mini KST servos The KST X10 mini is a 5mm shorter version of the KST X10 version.this servo has the same dimensions as a KST DS135 MG while being able to be used in 2S Lipo.this servo will be perfect as a wing servo.Delivered with rudder pedals and mounting screwsthe servo is delivered with two red plastic rudder pedals, a single one (4...
Servos - Servo micro KST X08H V6.0 HV (8g, 2.8kg.cm, 0.09s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

KST X08H V6.0 HV Micro Servo (8g, 2.8kg.cm, 0.09s/60°)

KST servos
153-X08H-V6
€40.83
The Micro servo X08H V5.0 KST is a powerful small digital servo with aluminium housing, all with double bearing ! H version = Vertically placed fixings.it will be perfect for F3K gliders.delivered with rudder pedals and fixing screws.the V5 version is an improvement of the V3 version, having a lack of play at the level of the train of pinions.it also...
Servos - 4x KST X10 HV 10mm servos (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC Servos - 4x KST X10 HV 10mm servos (28g, 10.8kg.cm, 0.10s/60°) - FLASH RC 2
  • Pack
RC Servos: Precision & Reliability for Modeling

4x KST X10 HV 10mm servos (28g, 10.8kg.cm, 0.10s/60°)

KST servos
P153-X10-x4
€151.33
Set of 4x X10 KST servosThe X10 KST is a new servo from the X-series offering HV products with high torque.The X10 is different from the DS225MG-HV by offering new electronics to further improve its accuracy.With a torque of 10Kg.cm, equipped with precise metal gears, you will get a solid, durable servo with minimal play.The servo is delivered with two...
Servos - Servo micro KST X08 V6.0 HV (8g, 2.8kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST X08 V6.0 HV (8g, 2.8kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Micro servo KST X08 V6.0 HV (8g, 2.8kg.cm, 0.09s/60°)

KST servos
153-X08-V6
€40.83
The Micro servo X08 V6.0 KST is a powerful small digital servo with aluminium housing, all with double bearing! version ni N/ni H = Fixations placed horizontally (classic).it will be perfect for F3K gliders.delivered with rudder pedals and fixing screws.the V6 version is an improvement of the V5 version, having a lack of play at the level of the train of...
Servos - Servo micro KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

Micro servo KST X08 PLUS MG HV (9.5g, 5.3kg.cm, 0.09s/60°)

KST servos
153-X08-PLUS
€43.33
The Micro servo X08 PLUS KST is a powerfull small digital servo with aluminium housing, all with double bearing ! The PLUS is the same housing as the V5.0, but with a more powerfull motor, developing up to 5,3kg/cm in 2S lipo ! ni N/ni H version = Horizontally placed fixations (classic).it will be perfect for F3K gliders.delivered with rudder pedals and...
Servos - Servo KST X10-710 HV 10mm (23g, 7.5kg.cm, 0.09s/60°) - FLASH RC
RC Servos: Precision & Reliability for Modeling

Servo KST X10-710 HV 10mm (23g, 7.5kg.cm, 0.09s/60°)

KST servos
153-X10-710
€39.00
The KST X10-710 is a new X-series servo offering HV products with high torque.The X10 is different from the DS225MG-HV by offering new electronics to further improve its accuracy.With a torque of 7.5Kg.cm and precise metal gears, you will get a solid, durable servo with minimal backlash.The servo is delivered with two red plastic servo horns, a single one...
Servos - Servo micro KST A08 V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC Servos - Servo micro KST A08 V6.0 HV (7g, 3.2kg.cm, 0.09s/60°) - FLASH RC 2
RC Servos: Precision & Reliability for Modeling

KST A08 V6.0 HV micro servo (7g, 3.2kg.cm, 0.09s/60°)

KST servos
153-A08-V6
€43.33
The main advantage of the A08 over the X08 is a slightly smaller footprint and a fully enclosed motor assembly. The gear train is also a brand new design and tighter than the X08 series and has a little extra travel. The weight between the X08 v5, X08 v6 and A08 v6 is about the same.The Micro servo A08 V6.0 KST is a powerful small digital servo with an...
Pack 4 servos - Servo wing KST X10 MINI PRO-A ( 20g, 8kg.cm, 0,08/60°)
  • Pack
RC Servos: Precision & Reliability for Modeling

Pack 4 servos - Servo wing KST X10 MINI PRO-A ( 20g, 8kg.cm, 0,08/60°)

KST servos
P153-X10-MINI-PRO-A
€158.25
PACK OF 4 SERVO The new X10 Mini Pro servo is a great mini servo for competition gliders, such as the F5J and F5B, and large-scale gliders. Compared with the classic X10 Mini servo, it has higher torque, faster speed and a wider travel angle. The X10 Mini Pro servo has an exceptional torque of 8.0 Kgf.cm and an incredible speed of 0.08 s.
Servo KST CM509MG HV 13mm (15g, 6.0kg.cm, 0,08sec/60°) Servo KST CM509MG HV 13mm (15g, 6.0kg.cm, 0,08sec/60°) 2
RC Servos: Precision & Reliability for Modeling

Servo KST CM509MG HV 13mm (15g, 6.0kg.cm, 0,08sec/60°)

KST servos
153-CM509MG
€21.58
The CM509MGmicro servo is ideal for small-scale RC aircraft and cars, thanks to its ultra-fast response and high torque. It offers an exceptional response speed of 0.08 s/60° and an impressive torque of 6.0 kgf.cm. Its compact design makes it perfect for all small RC models. What's more, the CM509MG is programmable, making it one of the most advanced...
FlashRC — Bande newsletter (Brevo à veni

Stay in the loop

RC news, guides and deals — once a week, no more.

By subscribing you accept our privacy policy. Unsubscribe anytime.

Your email addressSubscribe
Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text